APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!
Please Note: Always check your factory brake line connectors and compare them to ours. Some vehicles come with multiple caliper brands that may look similar, but may use different connectors that are not compatible.
Fits Audi A3 Quattro 15-20, A3 15-20, S3 15-20, TT Quattro 16-23; Volkswagen Golf SportWagen 15-19, Golf R 15-24, Golf Alltrack 17-19, Arteon 19-23, Tiguan 18-24, GTI 15-24, Jetta 19-24, Golf 15-21
Braided 304 stainless steel lines and connectors with a smooth-bore polytetrafluoroethylene (PTFE) / Teflon core
Attractive polyvinyl chloride (PVC) outer jacket in smoked clear with red inserts and polished connectors
APR 15-20 Audi A3/A3 Quattro/S3/15-24 VW Golf R Braided Stainless Steel Brake Line Set - Front
Application specific lengths connectors which resist leaks better than adapters
Each unit tested to 3,000 PSI, which is far beyond typical operating pressures
Average expansion of only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi
Less expansion than stock for a firmer pedal feel with less pedal travel
Compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids
Cr3+ steel connectors featuring an attractive polished finish
Independently lab certified as SAE “low-expansion” lines
APR Braided Stainless Steel Brake Lines (Set of 2) - Front
Stronger than the factory lines to better resist failure
Tested and meets FMVSS106 and SAE J1401 standards
All necessary hardware and included
High quality copper crush washers
Direct-fit plug-and-play upgrade
FRONT BRAKE HOSE KIT
Made in the USA
DOT-compliant
Brake Lines
