A Full Contact Dual Angle shim consisting of only four-part numbers that corrects Toe and Camber with one shim. Instruction sheets are included in each shim package. Various combinations of the shims and shim accessories are included on 88700 Dual Angle Shim Board, and our Passenger Car Assortment Board (88260). CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommended Tools: 75915 - EZ Shim Cutter Rear Adjustment range: Camber 1.50 Toe 1.50 Required: 1 shim per wheel
A patanted Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construcation, proven adjustment changes within .03 degrees toe and .10 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 EZ Shim Cutter. 75910 Dial Chart and EZ SHhim Online available for setting shims. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Patented full contact dual angle adjustable shim for FWD vehicles
SPC Performance EZ Shim Dual Angle Camber/Toe Shim (Red)
Some vehicles may require use of longer bolts
CAUTION: Check for caliper/rotor clearance
SPC 75800 REAR DUAL ANGLE SHIM (RED)
Adjusts Camber 1.50 and Toe 1.50
Durable plastic construction
Alignment Camber / Toe Shim
DUAL ANGLE SHIM (RED)
CAMBER TOE SHIM
REAR SHIM EA
