To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector while the ignition switch is in off position. Maintain minimum engine speed of 2000 rpm while spraying cleaner in short intervals of 2-3 seconds, and at the same time move the nozzle back and forth across opening to completely treat intake tract. If engine speed fluctuates more than 1000 rpm stop spraying immediately and wait for speed to stabilize. Keep cleaning fluid from contacting air mass meter or painted surfaces. If excess deposits inside EGR valve, intake manifold or intake valves, a second can of cleaner may be used to improve the result. After completion, leave the engine running at 2000 rpm for a minimum 20 seconds to allow complete removal of any residing fluid in intake system. Afterwards erase any stored fault codes.
A mixture of cleaning agents for cleaning and maintaining intake manifold and throttle body of Diesel engines. Dissolves and removes deposits and contaminants, restores normal function of moving parts. Also ideally suited to clean intake valves of modern direct-injection engines. Regular use keeps the intake system in perfect working order and reduces repair costs. Safe with catalytic converters, EGR and DPF systems. Application: Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Note: Use only with the spray probe attached to the can! The pre-assembled spray head is only a transport lock.
Amixture of cleaning agents for cleaning and maintaining intake manifold and throttle body of Diesel engines. Dissolves and removes deposits and contaminants, restores normal function of moving parts. Also ideally suited to clean intake valves of modern direct-injection engines. Regular use keeps the intake system in perfect working order and reduces repair costs. Safe with catalytic converters, EGR and DPF systems.
Specifically, for cleaning diesel engine intake systems. One Can (400 ml) is for one application. A preventive application every 12 months / 10,000 miles is recommended.
LIQUI MOLY 400mL Pro-Line Diesel Intake System Cleaner (Aerosol)
Suitable For Diesel Particulate Filters
Pro-Line Diesel Intake System Cleaner
Cleaning Possible Without Dismantling
LIQUI MOLY Intake Cleaner
Optimizes Economical Use
Intake System Cleaner
Good Cleaning Action
Intake Cleaner
Rapid Cleaning
Simple To Use
