1.5 in. Black Spring Preload Kit CAM-110227-BLK

Our Camburg coil spring preload kits are a cost effective and easy way to lift and level the front of your '21-24 Gen3 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilovers. Lifting the front also increases your compression travel which is a great benefit off-roading. We offer them in black and FOX orange versions. Don’t confuse these with standard cheap “spacer" lifts. These preload the coil spring, they do not space the shock down allowing the suspension to droop out too far and lose compression travel by bottoming out the shock sooner. Running a taller tire will also increase needed ground clearance when off-roading. We CNC machine these in-house from aerospace quality 6061-T6 aluminum, then have them anodized and laser etched. These install easily onto your factory OEM Fox coilovers and lift the front end 1.5". These are not designed to be used with aftermarket coil springs on the OEM stock shocks. Combine these with our KINETIK series billet upper control arms and trailing arms to correct and improve geometry for better handling. Use of a spring compressor required to install Can not be used in conjunction with an aftermarket coil spring Designed for the OEM FOX LiveValve shocks.

Combine these with our upper control arms to correct and improve geometry for better handling and alignment specs.

Camburg Ford Raptor 21-23 1.5in Front Spring Preload Spacer Kit (Black)

1.5 in. Black Spring Preload Kit CAM-110227-BLK

Camburg Performance Series Spring Preload Kit

Bead blasted, anodized and laser etched

1.5 in. Black Spring Preload Kit

Camburg Spring Preload Kit

Coil Spring Spacer Kit

CNC machined in-house

Spring Preload Kit

6061-T6 Aluminum

SprgKit