3000GT VR4 / Stealth AWD Transmission Seal Kit - ( rvenge3sAWDSealKit )

This is an OEM quality seal kit for the 3000GT and Dodge Stealth AWD Getrag transmissions. Please select 5 speed 18 spline or 5/6 Speed 25 Spline for your output shaft seal.

The dust buldge type driveside seal is no longer available and we use a passenger seal on both sides. The fit for both sides is very tight, so take extreme care getting the seal in straight. Make sure there are no rough spots or damage to the seal bore. If there is sand with medium fine sand paper any perfections out. Then grease the outside diameter and inside diameter of the seal before installation. If it starts to go at all crooked remove the seal and try again, it will usually NOT straighten out once crooked.

Includes end case cap (no guide, the guided one is NLA)

We use these in ALL our transmission rebuilds.